Our airsoft rendition, the Silverback MDR-X V3, faithfully emulates the renowned real steel 7.62mm model from Desert Tech LLC. With meticulous attention to detail, it replicates the original design and functionalities, boasting a top-notch gearbox that ensures exceptional performance across DMR and CQB scenarios.

Realistic construction and assembly

• Made under exclusive license from Desert Tech LLC
• Fully engraved markings with unique serial number.
• 6000 series aluminium receiver/outer barrel and muzzle brake.
• PA6 Nylon, fiberglass reinforced stock, grip and handguard, synthetic rubber buttpad.
  
• MLOK handguard, with 3 slots at 3, 6 and 9 o?clock.
  
• 2 steel QD attachments at the rear of the stock.
  
• Ambidextrous fire selector and 3 points magazine release.

High quality Gearbox

• CNC aluminium wide bore cylinder (26mm diameter, +19% wider than standard AEG), including a spring quick change design.
• Useful volume 22.5 cc ( with stock ventilated 75% cylinder)
• CNC aluminium cylinder head, NBR piston damper, stainless steel nozzle.
• CNC aluminium ventilated piston head, FKM o-ring, POM glider ring.
• CNC stainless steel & aluminium spring guide, equipped with a thrust bearing. 3 lugs design ensuring a better axial alignment.
  
• ?Tappet plate-less? construction.
• CNC aluminium piston body, hardened MIM steel 16 teeth rack.
  
• 18:1 torque up gear set, hardened MIM steel.
• ADC 12 aluminium gearbox carter, 10mm ball bearing.
• Neodymium high-torque motor 19000RPM (11.1V), short axis.

Programable Electronic Control Unit (ECU)

• Designed to operate on 11.1V and 7.4V Li-Po batteries.
• Electronic Trigger Unit (ETU), programable Electronic Control Unit (ECU) developed in cooperation with T238
  
• Gear cycle and fire selector position detection by Hall Effect sensor.
• Programable shooting mode (burst/binary), DMR cooldown, ROF setting, pre-cocking, sleep mode, active braking and battery protection. It also features a mechanical blocking and mosfet temperature safety protection.

Efficient hop-up design

• Hop-up unit made of durable Polycarbonate material.
• TCD, rotary ring design.
• Incremental ?click? adjustments using a ball plungers, 36 positions ranging from 0 up to 750 ?m with the low nub (installed, for standard bbs configuration), and from 500 up to 1250 ?m with the high nub (provided, for heavy bbs configuration).
• 420 mm brass inner barrel. 6.05 mm bore, chemical passivation surface treatment, AEG hop-up cut.
  
• 70 degree flat hop bucking.

The MDRX is coming with:

• 78 rounds AR10/SR25 type magazine.
• Two additional power spring (*).
• A pin puncher for easy battery change and disassembly.
• Allen key 2mm and 5mm.
• One high nub for the hop up unit, to lift bbs from 0.32 grams and above (low nub installed out of the box).
• One extra ball plunger for the hop-up unit.